CARACTERIZACIÓN MICROESTRUCTURAL DE LA PRECIPITACIÓN Y DISOLUCIÓN DE LA FASE SIGMA EN EL ACERO SAF 2507 / Microstructural Characterization of the Sigma Phase Precipitation and Disolution in The SAF 2507 Steel

Autores/as

  • Nakary Medina Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A
  • Edda Rodríguez Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A
  • Jorge Stella Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A

Palabras clave:

Acero inoxidable superdúplex, Envejecimiento, Disolución, Fase Sigma, Austenita Secundaria.

Resumen

El presente estudio tiene como objetivo la caracterización microestructural de muestras de acero superdúplex SAF 2507, sometidas a tratamientos de envejecimiento a 875 y 970 °C. En el primer caso se promueve la precipitación de la fase sigma y en el segundo, su disolución. La evolución microestructural observada en ambos tratamientos, se analizó mediante microscopía óptica y electrónica de barrido. Los resultados obtenidos indican que la cantidad relativa de la fase sigma aumenta progresivamente con el tiempo de envejecimiento a 875 °C, observándose una transformación casi total de la fase ferrita en fase sigma y austenita secundaria. Por otra parte, a medida de que se aumenta el tiempo de tratamiento a 970 °C, se observa una reducción del porcentaje de fase sigma y un aumento de la fase ferrítica. Asimismo, se evidencia el efecto de la precipitación de la fase sigma sobre la dureza.

ABSTRACT

This study shows the characterization of a superduplex stainless steel SAF 2507 after aging treatments at 875 and 970 °C. The first treatment promotes the precipitation of the sigma phase and the second one, its dissolution. The microstructural evaluation of both treatments was carried out by optical and scanning electron microscopy.The results showed an increase of the sigma phase fraction with the time of aging treatment at 875 °C, and an almost complete transformation of the ferrite phase in sigma and secondary austenite. On the other hand, increasing the time of treatment at 970 °C promotes a reduction of the sigma phase and the corresponding increase of the ferrite phase fraction. Furthermore, the study also showed the effect of sigma phase precipitation on the hardness.Keywords: Superduplex stainless steel, Aging treatment, Dissolution, Sigma phase, Secondary austenite.

Descargas

Los datos de descargas todavía no están disponibles.

Biografía del autor/a

Nakary Medina, Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A

Departamento de Ciencias de los Materiales

Edda Rodríguez, Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A

Departamento de Ciencias de los Materiales

Jorge Stella, Universidad Simón Bolívar, Apdo. 89000, Caracas 1080-A

Departamento de Ciencias de los Materiales

Descargas

Número

Sección

Ingeniería Metalúrgica y Ciencias de los Materiales