SABER UCV >
1) Investigación >
Artículos Publicados >

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/123456789/3051

Título : Thermodegradative study of HDPE–HA
Autor : Albano, Carmen
Palabras clave : nanocomposites
IKP method
Fecha de publicación : 2013
Editorial : Springer Verlag
Resumen : IKP and E2 function methods were used to study thermal stability of HDPE–HA nanocomposites synthesized by in situ ethylene polymerization at different volumes of solvent and temperatures. Thermal analysis was carried out at five different heating rates, b = 3, 5, 7, 10, and 13 C/min, under N2 atmosphere. Kinetics parameters calculated by IKP method presented a slight increase on activation energy when HA was incorporated in HDPE. A similar tendency was observed in the results obtained from the E2 function method, where the activation energy of the nanocomposites increased 100 kJ/mol with respect to unfilled polymer (420–460 kJ/mol). These results implied higher stability of HDPE due to HA incorporation. HDPE and HDPE–HA degradation mechanisms are represented by a set of functions, those with the highest probability were: nucleation and nucleus growth (S3) 23 %, reaction order (S5) 16 %, reaction in the interface (S6. S7, S8) 11–14 %, and potential law (S14, S17) 3 %.
URI : http://saber.ucv.ve/jspui/handle/123456789/3051
ISSN : 0170-0839
Aparece en las colecciones: Artículos Publicados

Ficheros en este ítem:

Fichero Descripción Tamaño Formato
polymer bulletin Termodeg. HDPE-HA metodo IKP 2013.pdf517.06 kBAdobe PDFVisualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2008 MIT and Hewlett-Packard - Comentarios