SABER UCV >
1) Investigación >
Artículos Publicados >

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/10872/4005

Título : Behavior of laser induced emission intensity versus laser power density during breakdown of optical materials
Autor : Mao, X.L.
Fernández, Alberto
Russo, R.E.
Palabras clave : Laser ablation
optical materials
fused silica
damage threshold
excitation temperature
photoluminescence
emission spectra
Fecha de publicación : 1994
Editorial : SPIE
Citación : Vol. 2428;
Resumen : Breakdown in Si02 is studied versus fluence using an intensified CCD spectrometer. Broad-band photoluminescence spectra were measured versus number of laser pulses. Before the breakdown of fused silica, the intensity of this photoluminescence increases. After breakdown, a plasma is formed and ablated Si emission lines are measured. The plasma is characterized by its emission spectra and excitation temperature temporal profiles. The temperature profiles of the plasma are calculated by the Bolzmann method. These data are studied to provide fundamental information on breakdown mechanisms in optical materials.
URI : http://hdl.handle.net/10872/4005
ISSN : 0-8194-1776
Aparece en las colecciones: Artículos Publicados

Ficheros en este ítem:

Fichero Descripción Tamaño Formato
SPIE 2428.pdf434.43 kBAdobe PDFVisualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2008 MIT and Hewlett-Packard - Comentarios