1) Investigación >
Artículos Publicados >

Por favor, use este identificador para citar o enlazar este ítem:

Título : Structural features and performance of LaNi1 xRhxO3 system for the dry reforming of methane
Autor : Rivas, M.E
Fierro, J.L.G
R. Goldwasser, Mireya
Pietri, Eglé
Pérez-Zurita, M.J
Griboval-Constant, A.
Leclercq, G.
Fecha de publicación : 2008
Editorial : Applied Catalysis A: General
Citación : Applied Catalysis A: General 344 (2008) 10–19
Resumen : A series of LaNiO3 perovskite-type oxides were synthesized and the influence of the preparation methodology and partial substitution of Ni by Rh on the performance of these solids in the dry reforming of methane was studied. The precursor perovskite-type oxides were synthesized by the citrate sol–gel method and by co-precipitation using K2CO3 as precipitating agent. An additional LaNiO3 sample used as reference was prepared by impregnation of La2O3 with a nickel nitrate solution. Characterization of the synthesized perovskite-type oxides was followed by X-ray diffraction (ex situ and in situ), nitrogen adsorption, temperature-programmed reduction and photoelectron spectroscopy. In addition, structural and surface changes produced during reaction were followed by techniques such as thermogravimetric analyses, electron microscopy and photoelectron spectroscopy. Highly homogeneous and crystalline oxides were obtained with various particle sizes depending on the synthesis method. Results show influence of the synthesis procedure on the catalytic performance of these solids by formation of different lanthanum phases during reaction. It is observed that at low reaction temperatures (400–500 8C), all samples presented similar activity while at higher temperatures (550–600 8C) the solid prepared by impregnation was more active. Partial substitution of nickel by rhodium (5% mol) produces an increase in the catalytic activity. No deactivation of all synthesized solids was observed after 24 h on-stream. 2008 Published by Elsevier B.V.
Aparece en las colecciones: Artículos Publicados

Ficheros en este ítem:

Fichero Descripción Tamaño Formato
Structural Features.pdf1.39 MBAdobe PDFVisualizar/Abrir

Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2008 MIT and Hewlett-Packard - Comentarios